Monday 14 January 2019

PRIUS OR CAMRY HYBRID TRACTION BATTERY - TO REBUILD OR REPLACE

We get many calls asking it it's worth getting their hybrid traction reconditioned rather than replaced. There are a few variables to consider when making your decision.

The first to decide upon is the general condition of your vehicle and how cost effective it is to have the traction battery replaced versus what the car is really worth. We have many clients that love their hybrid and spend the money regardless of what it costs and this is a decision only you can make.

Generally, if your hybrid has been looked after and well maintained then once the traction battery has been replaced the car will drive just like new.

The main issue with having your traction battery reconditioned is (not something we do here anymore) is that the condition of the cells that are re-used can't efficiently or accurately be measured to guarantee sufficient life after the repair. In other words, in six months time you may find a battery failure will occur again.

The other issue with battery reconditioning is you cannot buy genuine Panasonic cells to replace the damaged cells with so the cells they are changing out are already old and more likely to fail at any time. 

Some of our clients have had their batteries reconditioned elsewhere at a cost of anywhere between $800 and $1200 only to find out the battery has failed again within a year and they have to spend another $2500 to have the battery replaced altogether.

In  my opinion based on experience, it's far more cost effective to replace the battery with a brand new genuine unit that will come with a Toyota warranty and guarantee many years trouble free motoring. There are no aftermarket equivalents available at  this time and I would be reluctant to use them even if they were available.

Hope this helps.

Gavin
Current Tech Automotive.

Tuesday 12 June 2018

Tips for taking care of your car in Winter

As it gets colder in the winter months, you may start to notice some unwanted car troubles. There are a few things you can, and should, do to help improve your car's performance - and more importantly - safety.
 
  
Get Your Battery Tested
You will find out soon enough during the cold weather if there is a problem with your battery. Your battery has to work harder to get the engine to suck in the air and petrol. Ask us to perform a free battery test while your car is in our workshop, and avoid the unfortunate situation of being stuck in the rain and cold, unable to start your car! 
 
 
 
Check Your Tyres
Very importantly, check condition of your tyres. Rain on our roads can bring oils to the surface making roads more slippery and dangerous. Check the tread on your tyres before winter to make sure you have enough traction. If your tyres are worn down, you should replace them as soon as possible. Cold weather can also reduce your tyre pressures. If you haven’t checked the air pressures in your tyres since the cold weather kicked in, we recommend checking them at your earliest opportunity, and do so regularly!
 

Do A Lights Check
For your safety and of others on the road, you should make sure all your lights are working. Have a friend to help you check. If you find any lights not working properly, make a booking with us to get it checked out. It may be as simple as a replacing a globe, but it could also indicate a blown fuse or electrical fault.
 
  

And of course...Service Your Vehicle
We know we tell you this all the time, but … service your car! Extreme weather conditions, (be it hot or cold) can tendency to cause unseen problems with your car to come to the surface. Servicing your car is important to do all year round in order to prevent costly repairs. When your car is serviced with us, we automatically check the condition of your battery, tyres, windscreen wipers and all your lights.  And if you do find yourself in the unfortunate position of breaking down, all our services come with 6 months roadside assistance membership - meaning you will be back on the road again in no time!

Wednesday 11 October 2017

What to do if you put the wrong fuel in your car

Unfortunately, we've seen it before, more times than we'd like to think.  Unwitting diesel drivers call us in a panic, after filling their tank with Unleaded petrol.

It's fair to assume it's a common problem in Australia, and one that has occurred more often in recent years now that diesel nozzles share the same pump space with unleaded ones, and the fact that the unleaded nozzles do fit into modern diesel tanks.  Most of us are in a rush to fill our tanks and get moving, so we don't always double check the nozzle before filling up and driving away.

So, what happens if you put petrol in a diesel car?

This is the most disastrous mistake when it comes to the wrong fuel in the wrong car.  Once the petrol mixes with the diesel that's already in your tank you're creating a solvent, which will play hell with your car's fuel system immediately, and can lead to you needing a new engine, filters, fuel pump, injectors, and a whole new fuel tank.   Modern common-rail diesels are particularly susceptible to this kind of damage.

The most important thing to do is to recognise your mistake before you get back in the car.
As long as you don't turn the key, or press the start button, the damage can be kept to a minimum.  You will need to put your car in neutral, release the hand brake and push your car away from the pumps to a safe parking spot.

Now you'll need to call for professional help to drain the petrol out of your tank.  Your safest option is to call a tilt tray to bring your car straight to your mechanic, and let them do their work.  If you have driven away, you'll notice the problem pretty quickly as your engine will start making some awful noises, and if you ignore the noise and keep going you'll probably grind to a halt not far down the road.

Again here, quick action is key. Stop as soon as you can!  The sooner you stop, the more chance you'll have of being able to rectify the problem. Again, call a tilt tray and have your car taken straight to your trusted mechanic.

Subscribe to our mailing list

* indicates required

Tuesday 18 April 2017

So, its time to have your car serviced...


But which service should you choose?

When you call to book your car service, you are often asked if you would like a 'minor service' or a "major service'.
 
If your car is still under warranty, it is likely that you are following the car’s logbook servicing schedule as recommended by the vehicle manufacturer, and this pretty much takes into consideration all areas of the motor vehicle. Following the logbook service schedule ensures that most items deemed important are dealt with, as either recommended kilometre or time milestones are reached.
 
However, if your warranty has expired, of if you have decided no to not follow the vehicle manufacturers’ recommended service schedule, you may be left confused as to which service option to choose.  And lets face it, as much as we all know that we need safe and reliable vehicles, the costs involved in services other than a "minor", can be the deciding factor when  choosing which service to undertake.
 

Different Car Services Explained

 
It is helpful to understand what each type of car service includes.
 

What is a minor car service?

A minor service may also be called a basic or general service, and generally involves replacing the engine oil and engine oil filter. These will generally be the only parts” used in the service.  The minor service also includes an under-body and under-bonnet safety inspection. This process does not usually take a lot of time, and your car's fluid levels will be checked, as should the brakes, tyres, and lights.
 
If any additional parts are assessed as being faulty, they should only be replaced after authorisation from you.
 
Your mechanic should by now have a very good understanding of the overall mechanical condition of the vehicle, and you can general expect the service to cost between $150 and $300, depending on your car make and model.
 

What is a major car service?

The term major service can be quite confusing and has most mechanics consulting your car’s service manual to determine at which mileages various components need to be replaced. These recommended mileages are so different from one car maker to another, that trying to formulate some sort of general replacement interval for items such as spark plugs, timing belts, cabin filters, fuel filters, is not really possible.
 
The major service will always include an engine oil and engine oil filter change, but the make-up of the rest of the ‘major’ service can involve potentially hundreds of dollars in additional work. We advise you to request exactly what is required as additional items in the major service from your mechanic as well as an estimate of overall cost.
 

Already booked your service?

As the customer, you have the right to know a reasonable estimate of your service cost prior to commencement, and we always recommend you ask, so as to avoid any unpleasant surprises when you come to collect your car. Your mechanic should always contact you before carrying out any repairs or procedures that are in addition to the service you’ve requested. Your mechanic should request your approval to proceed with additional work, and to estimate or quote the additional cost before starting any work.
 
 

The downside of having only minor services done

Of course the minor service is always going to be the cheapest, quickest option. But be aware, at some point, somewhere and sometime, your car is going to break down.
If you only request only a minor service time after time, then yes, your car will probably breakdown roadside. Changing only the engine oil and oil filter and performing a basic inspection means your car has “been serviced”, but only ever partially.
Most workshops use modern and well-developed software to keep accurate records of your service history and should also be able to advise you of which items need to be replaced further to the engine oil and the engine oil filter, as services become due.
Parts, such as spark plugs, drive belts and other filters will definitely need replacing as the vehicle is used, and systems can be put in place to effectively spread the costs by performing additional items little by little, over upcoming services.
 
 

Communication is KEY!

Communication between you and your mechanic is necessary. Armed with an accurate service history (keep your invoices!), your mechanic can make well-informed decisions about your vehicle that will ultimately save you money.
 
Failing this, and not having any sort of service history, you need a mechanic you can trust to provide you with the right advice and aid you in spending your hard-earned dollars wisely when determining which items will need attention to keep your vehicle safe and reliable.
 
To discuss particular servicing requirements for your car, please call Current Tech Automotive on (08) 9452 7972.  You can also visit our website, or our Facebook page.

 

Thursday 17 November 2016

HORSE FLOAT ELECTRIC BRAKES - ARE YOUR BRAKES WORKING?

ARE YOUR HORSE FLOAT ELECTRIC BRAKES WORKING? DID YOU KNOW YOU NEED A BRAKE CONTROLLER FOR ELECTRIC BRAKES?












I have noticed a few posts going around on Facebook about terrible accidents that have happened involving horse floats, usually leading to the tragic loss of a beloved pet.

I recently had a customer come in that did not know how the trailer brakes worked on their float and were inadvertently travelling to shows with brakes that were not working at all. This prompted me to write this post and hopefully get horse float owners to ask themselves when it was that they last had their horse float brakes checked. Horse owners spend a great deal of money looking after their horses and float maintenance is just as important.

Unfortunately most owners assume that since the horse float doesn’t do all that many kilometres, that the brakes will not wear and do not need to be checked. Like anything mechanical, brakes need regular checking/servicing to ensure they are working efficiently and unfortunately we don’t realise how important those brakes really are until it’s too late.

So here are some questions to ask yourself:
  • Do you know if you have mechanical brakes or electric brakes? If you have electric brakes then you should have an electric brake controller situated in the tow vehicle.

  • Do you know how this controller works? Most electric brake controllers work the same way, but do you know how to set the gain correctly? Or do you just leave the gain in the same position and hook up and go?

  • Do you know if your brakes have a break-away system with a back up battery? Some trailers over a certain weight will have what is called a ‘Break-away’ system. This system has a 12v battery pack that applies the electric brakes if the trailer breaks away from the vehicle. Do you know how to test this system? Did you know that the back-up battery should be replaced every two years?

  • Can you apply the brakes manually to check if they are being applied? Do you know how? This is a really simple test that can give a quick indication that part of the brake system is working.

If you have hydraulic mechanical brakes, do you know the last time the hydraulic system was bled?

Like cars, the brake system should be flushed every two years to ensure that moisture does not build up in the brake components which will lead to corrosion and poor braking performance.

When was the last time the brakes were adjusted?

Just like a car, trailers should be serviced on a regular basis to check for wheel bearing play and ensure that the brakes are properly adjusted. Not all types of brakes need adjusting but it doesn’t hurt to check.

If you don't know the answer to these questions then perhaps give us a call on (08) 9452 7972

Gavin Craske
Current Tech Automotive
www.currenttech.com.au

Posted 17/11/2016

Thursday 18 August 2016

interVOLT DCC Pro Review

interVOLT DCC Pro Review


Model: DCC1225ACK-RP (Remote Display Model Reviewed)


I’ve been meaning to sit down and write this review about the interVOLT DCC Pro DC-DC Battery Charger for some time and in no way do I have any affiliation with interVOLT. I would also like to be upfront and admit that I may have been a little biased and one-eyed when it came to the Redarc DC-DC Battery Chargers and have sold and installed many Redarc DC-DC chargers but in saying that I have also used previous interVOLT products and I have always been impressed with the quality of their products. So with that, I finally purchased the interVOLT DCC Pro to satisfy my curiosity and put it to the test.
The first thing that draws my attention to the product brochure is the ability to have a remote display connected to the charger to display charging voltage, charging amperage and main battery voltage in the cabin as well as making changes to the charger configuration. When I open the box the first thing that comes to my attention is the typical construction I have come to expect from interVOLT products and the DCC Pro doesn’t let me down. The weight of the unit coupled with the ample cooling fins gives this unit the appearance that it is well made and considerable time and energy has been put into the design.


The unit comes with a 3m cord to connect the remote display to the charger and while this may suit many installations, it wasn’t long enough for our use on the headboard of a 79 Series Dual Cab Land Cruiser and we needed to order a 6m cord separately. I’d personally like to see the unit packaged with a 5m cord which would be ample for most installations. Another area of concern is the size of the cable plugs, they seem to have that look that they may present a problem if unplugged too often due to the size of the pins and cable but in all honesty this is just an opinion and I have no evidence to suggest that it won’t stand up to the task and time will tell if this really is a concern.
The charger is well made and of solid construction with a nice cover (with a status LED in the centre)  to conceal all cable connections which are connected utilising screw terminals, no need for splicing or soldering of cables. One factor that may present itself when installing is the height of the unit, having installed countless Redarc BCDC’s I’ve become accustomed to the ability to install the unit’s down in areas that don’t have much room but for most installations this won’t cause too much of an issue.


The charger is packed with a range of features:


·         Soft start boost mode – prevents damage to batteries and equipment


·         8 stage charging


·         Voltage sensing or ignition mode charging activation (For ECU controlled alternators)


·         5 user selectable battery types to change the charging algorithm to suit the battery


·         LED glow ring to indicate charger status


·         Ability to connect two separate chargers to the one remote display

·         Solar capable, direct connection from solar panel - 250w (no regulator required)

·         Electrical and thermal overload protection

·         Reverse polarity protection

·         Stainless steel terminals

 The charger does what most DC-DC chargers do and it does it well although I would love to see higher amperage versions like other brands. The instructions are comprehensive, easy to read and they give step by step set up instructions for setting the configuration, which are a breath of fresh air when you compare them to the instructions that come with Ctek chargers. While there isn’t a set RRP to go off, the interVOLT DCC Pro is being sold around the $545 mark and although it may be more expensive than what you can pick up a Redarc or Projecta unit for, the inclusion of the remote display unit and the quality of construction makes it all worthwhile. I also like the ability to customise things and this can be done quickly and easily via the remote display compared with other DC-DC chargers. interVOLT offer a Two year warranty on the charger and having produced electronic products since 2001 I’m sure their charger will stand the test of time and provide a fantastic alternative to other DC-DC chargers out there.
Happy Charging,
Gavin Craske
Current Tech Automotive
U10/95 Kelvin Rd
Maddington, W.A. 6109

interVOLT DCC Pro


interVOLT DCC Pro

Subscribe to our mailing list

* indicates required
 
 

Monday 16 May 2016

Can you afford to have your car off the road?

Analysts have revealed that the 2016/2017 State Budget will mean that average WA households will need to find an extra $160 per year to cover bills, with the main increases in electricity and water bills.
The growing cost of living can make it more and more difficult to make ends meet, and sometimes it is necessary to cut down on luxury items.  Sometimes, car maintenance can be a casualty of cutting costs in households.  But, it is important to remember that your vehicle is not a luxury item, it is an important necessity for your family.  Can you really afford to have your car off the road?
Getting your car serviced regularly can seem like an expense you can do without, but as these case studies of some actual customers show…cutting the cost of regular maintenance for your vehicle can end up costing you a whole lot more.
 
Case Study 1
Our young married customers were awaiting the birth of their first child and were trying to save as much money as they could before they were reduced to one income.  The husband was self employed and drove a diesel van for his business.  While money was tight, they skipped one scheduled service, thinking it would not hurt. 
However, at 62,000km their diesel van broke down.  The van was still under warranty, so they towed it to their dealer, who advised that they were going to need a new motor, as the engine oil had run dry and the motor had seized.  Due to not maintaining their scheduled logbook services, the customers had voided their warranty, and had to pay for the new motor at a cost of over $6,500. 
Had the customers realized the damage they were doing to the engine, they could have paid a lot smaller amount for their service, and saved themselves a lot of money!
Case Study 2
Changing your spark plugs can seem like an expensive addition to your servicing schedule.  It can be tempting to skip that part of the service, and “put it off until next time”.  However, spark plugs are a very important component of your car, providing the “spark” for ignition.
If your spark plugs are not changed within the manufacturers guidelines, and they begin to deteriorate, the voltage required to fire them increases. This increased voltage puts much greater stress on ignition coils and wires, and can cause ignition failure – at a much greater cost to your pocket!
For example, a 2012 Toyota Corolla requires its spark plugs to be changed at a total cost of $150.    Compare this to 4 spark plugs and ignition coils (at $150 each because you waited too long) could cost anywhere from $400, maybe more. As you can see, changing plugs before the ignition fails makes very good economic sense!
If you are trying to keep a rein on your car costs, consider at least having an oil and oil filter change every six months.  With prices starting from $160.00 for a minor service and full safety check, we can advise you of any urgent items that need replacing, and keep your car running smoothly in the meantime.   If you plan on keeping your vehicle past the warranty, having an engine oil change and inspection done at least twice a year or every 10,000 km is cheap insurance.